{"title":"Tiny Rig Co Products","description":"","products":[{"product_id":"tiny-rig-co-ultimate-device-holder-for-ineos-grenadier","title":"Tiny Rig Co | Grenadier Dash Device Mount for Phone Holders and RAM Mounts","description":"\u003ch2\u003eThe Ultimate Dash Phone \u0026amp; Device Mount for INEOS Grenadier \u0026amp; Quartermaster\u003c\/h2\u003e\n\u003cp\u003eMost device mounts look bolted on. This one looks like it shipped with the truck.\u003c\/p\u003e\n\u003cp\u003eThe Grenadier's dash wasn't built for the gear you actually run: a phone for maps, a tablet for offline nav, a Garmin Tread, a handheld radio. Clip-on mounts hold one device, and stacking several mounts clutters the dash. Our mount fixes both. It replaces the factory trim below the center vents, right above the console controls, and turns it into a full mounting platform. Your devices sit where you can see them without blocking the screen or vents.\u003c\/p\u003e\n\u003ch3\u003eFactory Look, No Compromises\u003c\/h3\u003e\n\u003cp\u003eWe 3D scanned the Grenadier's original trim and machined a replacement from 6061-T6 aluminum with a UV-resistant black anodize. It follows the factory lines and bolts in at the original mounting points, with no drilling. Set it next to the factory part and the only difference is what it can carry.\u003c\/p\u003e\n\u003ch3\u003eOne Mount. Every System.\u003c\/h3\u003e\n\u003cp\u003ePhone, tablet, GPS or radio, on RAM, 67 Designs, BuiltRight or 1\/4\"-20 gear, all from one base. You don't have to commit to one ecosystem.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRAM Mounts:\u003c\/strong\u003e 1\" RAM ball included, plus 1\/4\"-20 points for more RAM bases\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e67 Designs:\u003c\/strong\u003e (3) M5 points sized for a 67 Designs 300mm rail\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuiltRight and 1\/4\"-20 gear:\u003c\/strong\u003e (6) individual mounting points\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix and match:\u003c\/strong\u003e Run a phone and a tablet side by side, or a GPS and a radio\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBuilt Out on the Trail\u003c\/h3\u003e\n\u003cp\u003eIt started as a simple trim piece to carry a 67 Designs rail. After more than a year of testing on every kind of terrain, with and without rails, it became the platform it is now. We've run it with tablets, a Garmin Tread and handheld radios. The latest version adds:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDiscreet wire-routing notches\u003c\/li\u003e\n\u003cli\u003eAdditional mounting locations\u003c\/li\u003e\n\u003cli\u003eSubtle, relocated branding for a cleaner look\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBolts on at factory mounting points, with no drilling\u003c\/li\u003e\n\u003cli\u003eUSB pass-through on both sides to keep your devices charged\u003c\/li\u003e\n\u003cli\u003eDiscreet wire-routing notches for a clean install\u003c\/li\u003e\n\u003cli\u003eMachined 6061-T6 aluminum, UV-resistant black anodize\u003c\/li\u003e\n\u003cli\u003eOEM-matched fit from a 3D scan of the factory trim\u003c\/li\u003e\n\u003cli\u003eOver a year of real-world testing across all terrains\u003c\/li\u003e\n\u003cli\u003eDesigned and built by Tiny Rig Co\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: machined 6061-T6 aluminum\u003c\/li\u003e\n\u003cli\u003eFinish: UV-resistant black anodize\u003c\/li\u003e\n\u003cli\u003e(6) 1\/4\"-20 mounting locations\u003c\/li\u003e\n\u003cli\u003e(3) M5-0.8 mounting locations for a 67 Designs 300mm rail\u003c\/li\u003e\n\u003cli\u003eIncluded 1\" RAM ball\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e2023+ INEOS Grenadier Station Wagon and 2024+ INEOS Quartermaster, all trims. Left-hand-drive models only. Does not fit right-hand-drive vehicles.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Tiny Rig Co dash device mount\u003c\/li\u003e\n\u003cli\u003eAdditional trim pieces, with optional USB pass-through cutouts\u003c\/li\u003e\n\u003cli\u003e1 x 1\" RAM ball mount\u003c\/li\u003e\n\u003cli\u003eAll hardware needed for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eBolt-on, with no drilling. Remove the factory trim below the center vents and bolt this in its place at the original mounting points.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhere does it mount?\u003c\/strong\u003e\u003cbr\u003eIt replaces the trim below the center vents, above the console controls.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it hold a tablet?\u003c\/strong\u003e\u003cbr\u003eYes. We've tested it with tablets, a Garmin Tread and handheld radios.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work with 67 Designs, RAM or BuiltRight?\u003c\/strong\u003e\u003cbr\u003eYes, all three. The 1\" RAM ball is included, and the M5 points take a 67 Designs 300mm rail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I charge my phone while it's mounted?\u003c\/strong\u003e\u003cbr\u003eYes. A USB pass-through on each side runs a cable straight to your device.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I have to drill my dash?\u003c\/strong\u003e\u003cbr\u003eNo. It uses the factory mounting points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the Quartermaster?\u003c\/strong\u003e\u003cbr\u003eYes, the 2024+ left-hand-drive Quartermaster.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit right-hand-drive Grenadiers?\u003c\/strong\u003e\u003cbr\u003eNo. It fits left-hand-drive models only.\u003c\/p\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\n\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e\n\u003ch3\u003eSee It in Action\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe loading=\"lazy\" width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/27-jxgy55Gg\" title=\"Tiny Rig Co Grenadier dash device mount video 1\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe loading=\"lazy\" width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/vX0pMp6QnSQ\" title=\"Tiny Rig Co Grenadier dash device mount video 2\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe loading=\"lazy\" width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/Vk7AHjeQvPE\" title=\"Tiny Rig Co Grenadier dash device mount video 3\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Tiny Rig Co","offers":[{"title":"Default Title","offer_id":50497883013336,"sku":"100100","price":235.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/6980\/2902\/files\/4CB2485B-BB57-41C9-82D1-7FED9F351C5D.heic?v=1760718599"},{"product_id":"tiny-rig-co-complete-garmin-power-switch-kit-for-ineos-grenadier","title":"Tiny Rig Co | Complete Garmin PowerSwitch Kit for Ineos Grenadier \u0026 Quartermaster","description":"\u003ch2\u003eGarmin PowerSwitch Mount for Ineos Grenadier\u003c\/h2\u003e\n\u003cp\u003eThis is one of our favorite products to build into a Grenadier, and for good reason. At \u003cstrong\u003eTiny Rig Co.\u003c\/strong\u003e, we obsess over the details: clean wiring, stainless hardware, and components that feel like they belong in the vehicle from the factory. This kit is no different.\u003c\/p\u003e\n\u003cp\u003eWe've put together a complete solution that bolts directly into the Ineos Grenadier using factory holes. No drilling, no guesswork. At the heart of it is the \u003cstrong\u003eGarmin PowerSwitch\u003c\/strong\u003e, our go-to choice for lighting and accessory control. After years of using other systems like Switch Pro and sPOD, the Garmin stands out above the rest. Its app is incredibly well-designed, integrates seamlessly with Apple CarPlay, and feels like a factory-installed system right on your vehicle's display.\u003c\/p\u003e\n\u003ch3\u003eWhat's Inside\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGarmin PowerSwitch\u003c\/li\u003e\n\u003cli\u003eBlue Sea Systems 4-Blade Fuse Holder (ideal for fridge, radio, or USB ports on your secondary battery)\u003c\/li\u003e\n\u003cli\u003eBlue Sea Negative Bus Bar (a clean, convenient ground point for all your wiring)\u003c\/li\u003e\n\u003cli\u003eAll stainless hardware\u003c\/li\u003e\n\u003cli\u003eHigh-quality pre-loomed wiring\u003c\/li\u003e\n\u003cli\u003eBlue Sea Terminal Fuse Block (2 Fuse Locations - PowerSwitch and Fuse Holder)\u003c\/li\u003e\n\u003cli\u003ePowder-coated black aluminum mounting plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits the Ineos Grenadier and Quartermaster. The kit mounts to factory mounting points under the rear seat, next to the battery.\u003c\/p\u003e\n\u003ch3\u003eWhy It Works\u003c\/h3\u003e\n\u003cp\u003eThis setup is all about \u003cstrong\u003econtrol and organization\u003c\/strong\u003e. The Garmin lets you manage chase lights, roof top tent or roof conversion lighting, strobe modes, or even cabin lights with a tap on your screen. The Blue Sea fuse block and bus bar keep your constant-draw gear running reliably, while keeping wiring tidy and professional.\u003c\/p\u003e\n\u003cp\u003eEvery piece of this kit has been chosen because it makes installs cleaner, smarter, and more reliable - just the way we like it. If you're looking for a system that blends seamlessly into your Grenadier and gives you pro-level control of your accessories, this is it.\u003c\/p\u003e","brand":"Tiny Rig Co","offers":[{"title":"Default Title","offer_id":50892365922520,"sku":"100200","price":850.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/6980\/2902\/files\/GrenadierPowerSwitchDSC09696.jpg?v=1791849768"},{"product_id":"tiny-rig-co-strap-kit","title":"Tiny Rig Co | 1\" Billet Cam Strap, 48\"","description":"\u003ch2\u003eAustere Cam Strap: Tiny Rig Co Edition\u003c\/h2\u003e\n\u003cp\u003eA tie-down that punches way above its weight. We had Austere Manufacturing run a batch of their cam straps stamped with the Tiny Rig Co logo. Same proven hardware, now flying our colors.\u003c\/p\u003e\n\u003cp\u003eAt the heart of it is Austere's 1\" cam buckle, CNC-machined from billet aluminum. It tips the scale at just 11.25 grams, lighter than most plastic side-release buckles, but it's in a different league on strength. This buckle will outlast the webbing it's mounted to.\u003c\/p\u003e\n\u003cp\u003eThe 48\" length keeps things versatile and packable: cinch down gear in the bed, lash a load to the rack, or trim it to size for a custom fit (just melt the cut end to stop fraying). Need more reach or more hold? Link two straps together for bigger loads.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e48\" strap: versatile, compact, and ready for the trail\u003c\/li\u003e\n\u003cli\u003e1\" black nylon webbing for excellent abrasion resistance and strength\u003c\/li\u003e\n\u003cli\u003eBlack buckle machined from billet aluminum, with a white laser-etched Tiny Rig Co logo\u003c\/li\u003e\n\u003cli\u003eStainless steel pin\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant stainless steel spring\u003c\/li\u003e\n\u003cli\u003eMade in the USA by Austere Manufacturing in the Pacific Northwest\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBuckle specs:\u003c\/strong\u003e Designed for 1\" webbing · 11.25 grams\u003c\/p\u003e\n\u003ch3\u003eBuy More, Save More\u003c\/h3\u003e\n\u003cp\u003eStraps tend to get used faster than you'd think. Grab 2 and save $5, or pick up a set of 4 and save $30 compared to buying them one at a time.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1, 2 or 4 Tiny Rig Co edition Austere cam straps, depending on the option you choose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eA Note on Safety\u003c\/h3\u003e\n\u003cp\u003eAustere Manufacturing buckles are tough, but they're not certified for safety-critical use. Don't use these straps anywhere a failure could cause damage, injury or death.\u003c\/p\u003e\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Tiny Rig Co","offers":[{"title":"1 Strap","offer_id":51434904453336,"sku":"100400","price":55.0,"currency_code":"USD","in_stock":true},{"title":"2 Straps","offer_id":51434904486104,"sku":"200400","price":105.0,"currency_code":"USD","in_stock":true},{"title":"4 Straps","offer_id":51434904518872,"sku":"200401","price":190.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/6980\/2902\/files\/DSC05790.jpg?v=1772487384"},{"product_id":"illuminated-grab-handle-by-tiny-rig-co-ineos","title":"Tiny Rig Co | Illuminated Grab Handle for Ineos Grenadier and Quartermaster","description":"\u003ch2\u003eIlluminated Grab Handle for Ineos Grenadier \u0026amp; Quartermaster\u003c\/h2\u003e\n\u003cp\u003eBring functional lighting and machined durability to your Ineos Grenadier or Quartermaster with the Tiny Rig Co Illuminated Grab Handle. Designed as a direct replacement for the factory grab handle, this billet aluminum upgrade adds clean, controllable interior lighting exactly where the Grenadier needs it most.\u003c\/p\u003e\n\u003cp\u003eEach handle features an integrated tri-color dimmable light with red, amber and white output. Color and brightness are controlled directly from the handle, making it easy to switch from bright task lighting to low-glare night lighting without reaching for a separate controller.\u003c\/p\u003e\n\u003cp\u003eMachined from 6061 aluminum with a blasted black anodized finish, the handle is built for a clean factory-style appearance while adding real utility. The compact 180 mm main body, machined mounting standoffs and TRC logo detail on the face give it a purpose-built look that matches the rugged interior of the Grenadier.\u003c\/p\u003e\n\u003cp\u003eThe handle mounts directly to the factory grab handle locations and includes stainless hardware with a black coating. It is 12V powered and comes with a short harness that can be extended and wired to your secondary battery, auxiliary switch system or lighting control system.\u003c\/p\u003e\n\u003cp\u003eWhether you're fixing the poor factory map lighting, adding usable light while camping, or creating better interior lighting when hanging out or sleeping in the vehicle, this is a clean and durable upgrade for real-world use.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits Ineos Grenadier and Quartermaster\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the factory grab handle\u003c\/li\u003e\n\u003cli\u003eMachined 6061 billet aluminum construction\u003c\/li\u003e\n\u003cli\u003eBlasted black anodized finish\u003c\/li\u003e\n\u003cli\u003eIntegrated tri-color dimmable light: red, amber and white\u003c\/li\u003e\n\u003cli\u003eDimming and color control built directly into the handle\u003c\/li\u003e\n\u003cli\u003e12V powered\u003c\/li\u003e\n\u003cli\u003eIncludes short wiring harness for extension to a secondary battery, auxiliary switch or lighting control system\u003c\/li\u003e\n\u003cli\u003eStainless hardware with black coating\u003c\/li\u003e\n\u003cli\u003eMounts directly to factory locations\u003c\/li\u003e\n\u003cli\u003eSold individually or in sets of 4\u003c\/li\u003e\n\u003cli\u003eDesigned and built by Tiny Rig Co\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest Uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eImproved interior map lighting\u003c\/li\u003e\n\u003cli\u003eCamp lighting inside the vehicle\u003c\/li\u003e\n\u003cli\u003eLow-glare red or amber nighttime lighting\u003c\/li\u003e\n\u003cli\u003eSleeping or relaxing inside the vehicle\u003c\/li\u003e\n\u003cli\u003eClean OEM-style interior lighting upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eAll years of the INEOS Grenadier and Quartermaster. Replaces any of the 4 factory grab handle positions.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIlluminated grab handle with integrated tri-color light (1 or 4, depending on option)\u003c\/li\u003e\n\u003cli\u003eStainless mounting hardware with black coating\u003c\/li\u003e\n\u003cli\u003eShort 12V wiring harness\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eMounts directly to the factory grab handle locations.\u003c\/p\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\n\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Tiny Rig Co","offers":[{"title":"Single","offer_id":51701256421592,"sku":"100300","price":230.0,"currency_code":"USD","in_stock":true},{"title":"Set of 4","offer_id":51701256454360,"sku":"100300-4","price":685.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/6980\/2902\/files\/DSC09745.jpg?v=1791915407"},{"product_id":"tiny-rig-co-ineos-grenadier-trackbar-relocation-kit","title":"Tiny Rig Co | Grenadier Rear Track Bar Relocation Kit","description":"\u003ch2\u003eIneos Grenadier Rear Track Bar Correction Bracket\u003c\/h2\u003e\n\u003cp\u003eLift your Grenadier and you change its rear axle geometry. The factory rear track bar (panhard rod) is designed around stock ride height. Once you add lift, the axle shifts laterally off-center, the track bar runs at a steeper angle, and you lose the precise on-center feel Ineos engineered in from the factory. Our Rear Track Bar Correction Bracket relocates the track bar mounting point to restore proper geometry, recentering the axle under the body and bringing the bar back toward its intended operating angle.\u003c\/p\u003e\n\u003ch3\u003eWhy a Correction Bracket, Not Just an Adjustable Track Bar?\u003c\/h3\u003e\n\u003cp\u003eA lift creates \u003cem\u003etwo\u003c\/em\u003e problems, not one: the axle ends up \u003cstrong\u003eoff-center\u003c\/strong\u003e, and the track bar ends up at the \u003cstrong\u003ewrong angle\u003c\/strong\u003e. An adjustable track bar only fixes the first. By lengthening the bar it pushes the axle back to center at a single static ride height, but it does nothing about the angle and often leaves the bar sitting at that steep lifted angle. That matters because angle controls how the axle behaves through suspension travel.\u003c\/p\u003e\n\u003cp\u003eOur bracket relocates the mounting point, which recenters the axle \u003cem\u003eand\u003c\/em\u003e brings the bar back toward its factory-flat angle. The advantages:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentered through the whole stroke, not just at ride height.\u003c\/strong\u003e A steeply angled bar makes the axle migrate side to side as the suspension cycles. That's the wandering, darting feel over bumps and washboard. A flatter bar keeps the truck tracking centered whether loaded, articulated, or hammering a dirt road. An adjustable bar set to the right length still wanders if it's left at a steep angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory roll center preserved.\u003c\/strong\u003e Track bar angle sets rear roll center height. Restoring the angle keeps body roll and cornering balance where Ineos tuned them, instead of quietly moving them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep your stock track bar.\u003c\/strong\u003e Retain the robust OE bar and bushings, with no added threaded sleeves, jam nuts, or rod ends that can wear out, work loose, or introduce clunk and NVH (noise, vibration, harshness).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimpler and reversible.\u003c\/strong\u003e Bolt-on, no drilling, fully reversible, and typically a fraction of the cost of a quality adjustable bar.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe bottom line: an adjustable bar recenters the axle but can leave the geometry compromised. The bracket fixes the root cause, the angle, so the centering holds up through full travel. (At very tall lifts, some run both: the bracket to recover angle, and an adjustable bar for final fine-tuning.)\u003c\/p\u003e\n\u003ch3\u003eTrail-Proven in Moab\u003c\/h3\u003e\n\u003cp\u003eWe didn't just design this on paper. We ran it hard on the trails in Moab and tested it on the road too, removing it and driving the same terrain without it, then reinstalling it back to back, so we could actually feel the difference rather than guess at it. With the bracket installed, the rear axle tracks centered, the steering settles, and the truck holds its line over off-camber and articulated terrain instead of wandering. The on-road manners come back too: less lateral slop, a more planted rear end, and a vehicle that simply goes where you point it.\u003c\/p\u003e\n\u003ch3\u003eDialed In for Your Lift Height\u003c\/h3\u003e\n\u003cp\u003eTwo mounting positions let you match the correction to your setup. Run the \u003cstrong\u003ebottom hole for stock to 1.5\" of lift\u003c\/strong\u003e, and the \u003cstrong\u003etop hole for 1.5\" and above\u003c\/strong\u003e. Pick the position for your ride height and the axle comes back to center where it belongs.\u003c\/p\u003e\n\u003ch3\u003eConstruction\u003c\/h3\u003e\n\u003cp\u003eThis bracket is built for abuse. Two 1\/4\" steel plates are sandwiched together to create a single, incredibly stiff unit that resists the flex and load a rear track bar puts into its mount. There's no deflection here to wash out the geometry correction you installed it for. It stays put, trail after trail.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1\/4\" steel brackets sandwiched together for incredible strength\u003c\/li\u003e\n\u003cli\u003ePowder-coated finish\u003c\/li\u003e\n\u003cli\u003eM14-1.5 yellow zinc hardware throughout for corrosion resistance and proper clamp load\u003c\/li\u003e\n\u003cli\u003eTwo-position design: bottom hole for stock to 1.5\" lift, top hole for 1.5\"+ lift\u003c\/li\u003e\n\u003cli\u003eBolt-on installation: no drilling, fully reversible\u003c\/li\u003e\n\u003cli\u003eDesigned and built by Tiny Rig Co\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eAll INEOS Grenadier models.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll brackets needed for install\u003c\/li\u003e\n\u003cli\u003eAll M14-1.5 yellow zinc hardware needed for install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eBolt-on, with no drilling, and fully reversible. \u003cstrong\u003eAn alignment is required after installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\n\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Tiny Rig Co","offers":[{"title":"Default Title","offer_id":51963708342488,"sku":"100500","price":320.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/6980\/2902\/files\/DSC09716.jpg?v=1791915730"},{"product_id":"tiny-rig-co-gfc-third-brake-light-with-wolfbox-camera-integration","title":"Tiny Rig Co | GFC Billet Third Brake Light with Wolfbox Camera Mount","description":"\u003ch2\u003eBillet Third Brake Light with Wolfbox Rearview Camera Integration for GFC Campers\u003c\/h2\u003e\n\u003cp\u003eThe integrated billet third brake light is a no-drill, no-fuss way to add the popular Wolfbox rearview camera to your GFC, Tune or Lone Peak V1 camper. A Wolfbox camera is one of the first upgrades most new camper owners make. Whether your camper has a rear window or you went fully enclosed for security, a digital rearview camera is one of the best and easiest quality-of-life mods you can do. Until now, installing one meant drilling holes in your brand new camper. This third brake light mounts right where the original one was, so there's no drilling and no visible wires. Simply put, it's the most seamless Wolfbox camera install possible.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003eEach kit includes a fully billet-machined aluminum housing, designed to be as low profile, sleek and modern as possible, plus a brand new LED third brake light. The polycarbonate lens is fully sealed against dust, water and weather, and the light has a unique \"glow\" look that matches modern vehicle lighting.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSleek, modern appearance\u003c\/li\u003e\n\u003cli\u003eDOT approved lighting\u003c\/li\u003e\n\u003cli\u003eFully bolt-on, completely reversible install, with no drilling\u003c\/li\u003e\n\u003cli\u003eIntegrates with the Wolfbox G900 Tri-Pro and G930 cameras\u003c\/li\u003e\n\u003cli\u003eDesigned and built by Tiny Rig Co\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGo Fast Campers (GFC) Platform campers: V1, V2, V2 Pro, V2 Max\u003c\/li\u003e\n\u003cli\u003eGFC toppers without windows\u003c\/li\u003e\n\u003cli\u003eTune campers\u003c\/li\u003e\n\u003cli\u003eLone Peak V1 campers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDoes not fit:\u003c\/strong\u003e GFC toppers with windows, or Lone Peak V2 campers (they use a different style of third brake light).\u003c\/p\u003e\n\u003cp\u003eHave a GFC topper with a rear window? Check out our \u003ca href=\"\/products\/tiny-rig-co-gfc-topper-rear-wolfbox-camera-mount\"\u003eWolfbox Rear Camera Mount for GFC Toppers\u003c\/a\u003e. It reuses your factory third brake light mounting points and keeps the camera safe inside the topper.\u003c\/p\u003e\n\u003ch3\u003eCompatible Cameras\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWolfbox G900 Tri-Pro camera\u003c\/li\u003e\n\u003cli\u003eWolfbox G930 rearview camera\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBillet 6061 aluminum light housing\u003c\/li\u003e\n\u003cli\u003eLED third brake light\u003c\/li\u003e\n\u003cli\u003eNew screws and all hardware needed for install\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurchase separately:\u003c\/strong\u003e the Wolfbox camera is not included and must be purchased separately through Wolfbox's website\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eAbout 30 minutes to mount on the camper. Wiring time depends on your vehicle.\u003c\/p\u003e\n\u003cp\u003eThe billet mount uses the same mounting points as your camper's factory third brake light, and the brake light and camera wires route the same way as the original. The brake light has 3 wires: white is ground, red is brake light 12V, and black is a low-power running light 12V. Wire it just like the original: connect white to ground and red to the brake light power wire.\u003c\/p\u003e\n\u003cp\u003eThe running light is optional. We recommend leaving the black wire disconnected to stay compliant with US road rules.\u003c\/p\u003e\n\u003ch3\u003eAdd Interior Light\u003c\/h3\u003e\n\u003cp\u003eThis third brake light works with our \u003ca href=\"\/products\/tiny-rig-co-gfc-billet-aluminum-adjustable-interior-light\"\u003eGoFluxx 12\" Interior Light Mount for GFC Campers\u003c\/a\u003e, which mounts behind the third brake light on the inside of the camper. Run both for a rearview camera outside and adjustable tri-color light inside.\u003c\/p\u003e","brand":"Tiny Rig Co","offers":[{"title":"Default Title","offer_id":52390789447896,"sku":"100600","price":250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/6980\/2902\/files\/DSC09632.jpg?v=1791916580"},{"product_id":"tiny-rig-co-billet-vent-pod-lights-for-baja-designs-squadron-2-0-toyota-tacoma-4th-gen","title":"Tiny Rig Co | Billet Vent Light Mounts for Squadron 2.0 - 2024+ Tacoma","description":"\u003ch2\u003eBillet Vent Light Mounts for Baja Designs Squadron 2.0 – 2024+ Toyota Tacoma (4th Gen)\u003c\/h2\u003e\n\u003cp\u003eYour 4th Gen Tacoma's front vents were built for more than looks. So we turned that factory opening into a clean home for a pair of Baja Designs Squadron 2.0s.\u003c\/p\u003e\n\u003cp\u003eWe laser scanned the factory bumper and the OEM bezel, then 3D printed more than 100 versions of this bracket and tested them with a bunch of different lights. Somewhere along the way we asked ourselves: why settle?\u003c\/p\u003e\n\u003cp\u003eSo we stopped printing and started machining. Each mount is cut from a solid chunk of 6061-T6 billet aluminum, so it holds aim over washboard roads, trail vibration and highway miles. Then it gets a black UV-stable hard coat anodize that won't fade, chalk or chip the way paint and powder coat do.\u003c\/p\u003e\n\u003cp\u003eFor the light, we went with the most popular pod on the market right now: the Baja Designs Squadron 2.0. The Sport puts out 3,200 raw lumens and throws light farther than the previous Squadron. Want to light up every jackrabbit in the county? Go Pro: 5,921 raw lumens, more than even Baja's XL Pro.\u003c\/p\u003e\n\u003cp\u003eTwo vents. Two Squadrons. One very well-lit Tacoma.\u003c\/p\u003e\n\n\u003ch3\u003eChoose Your Setup\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBillet Brackets Only:\u003c\/strong\u003e already running Squadron 2.0s? Swap your Baja bezels for our mounts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdd Squadron 2.0 Sport or Pro:\u003c\/strong\u003e a complete kit with lights, in Driving\/Combo or Wide Cornering, clear or amber.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Squadron 2.0 Is Right for You?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eSport\u003c\/th\u003e\n\u003cth\u003ePro\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput (per light)\u003c\/td\u003e\n\u003ctd\u003e3,200 raw lumens\u003c\/td\u003e\n\u003ctd\u003e5,921 raw lumens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower draw\u003c\/td\u003e\n\u003ctd\u003e30W\u003c\/td\u003e\n\u003ctd\u003e65W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest for\u003c\/td\u003e\n\u003ctd\u003eDaily drivers and street\/trail builds\u003c\/td\u003e\n\u003ctd\u003eDedicated off-road builds that need maximum light\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eDriving\/Combo\u003c\/strong\u003e is a balanced beam with good reach and spread for mixed trail and road use. \u003cstrong\u003eWide Cornering\u003c\/strong\u003e is a wider beam that lights up tight trails, switchbacks and the sides of the truck. \u003cstrong\u003eClear\u003c\/strong\u003e gives the most raw brightness. \u003cstrong\u003eBaja Amber\u003c\/strong\u003e cuts glare in dust, fog and rain.\u003c\/p\u003e\n\u003cp\u003eBoth models have Baja's IP69K waterproof rating, uService design (field-replaceable lenses and reflectors) and a 9-color backlight, which still shows with our billet mount installed.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect fit for every 2024+ Toyota Tacoma front vent, with a small trim to the bumper opening\u003c\/li\u003e\n\u003cli\u003eReplaces the Squadron 2.0 bezel and uses Baja's original screws\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 billet aluminum\u003c\/li\u003e\n\u003cli\u003eBlack UV-stable hard coat anodize that resists fading and corrosion\u003c\/li\u003e\n\u003cli\u003eReversible: the factory vent trim reinstalls if you ever remove the mounts\u003c\/li\u003e\n\u003cli\u003eDesigned and built by Tiny Rig Co\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits all 2024, 2025 and 2026+ Toyota Tacoma (4th Gen) trims: SR, SR5, TRD PreRunner, TRD Sport, TRD Off-Road, Limited, TRD Pro and Trailhunter, including i-FORCE MAX hybrid models.\u003c\/p\u003e\n\u003cp\u003eFits Baja Designs Squadron 2.0 Sport and Pro only. Does not fit other lights, including Squadron SAE, Squadron-R or first-gen Squadron.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 x billet vent light mounts\u003c\/li\u003e\n\u003cli\u003eStainless steel backing plates and screws\u003c\/li\u003e\n\u003cli\u003eCutting template and installation instructions\u003c\/li\u003e\n\u003cli\u003e2 x Baja Designs Squadron 2.0 lights (with any \"Add Squadron 2.0\" option)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBaja Designs wiring harness is not included.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003ePlan on 2–3 hours, including wiring. We highly recommend removing the front bumper.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUse the included template to trim a small section of the bumper opening. No tabs or mounting points are cut, and the factory trim will still cover the opening if you remove the mounts later.\u003c\/li\u003e\n\u003cli\u003eRemove the Baja Designs bezel from each Squadron 2.0.\u003c\/li\u003e\n\u003cli\u003eMount the billet bracket to the light using the same screws the Baja bezel used.\u003c\/li\u003e\n\u003cli\u003eInstall the mounts with the stainless backing plates and screws, then wire the lights.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFull instructions are included with every order.\u003c\/p\u003e\n\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\n\u003cp\u003eCurrently on pre-order. Orders begin shipping November 20.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eOff-road use only. Check local laws before using auxiliary lighting on public roads.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tiny Rig Co","offers":[{"title":"Billet Brackets Only","offer_id":52918049505496,"sku":"101200","price":395.0,"currency_code":"USD","in_stock":true},{"title":"Add Squadron 2.0 Sport - Clear Driving\/Combo","offer_id":52546401009880,"sku":"201201","price":645.0,"currency_code":"USD","in_stock":true},{"title":"Add Squadron 2.0 Sport - Amber Driving\/Combo","offer_id":52546401042648,"sku":"201204","price":645.0,"currency_code":"USD","in_stock":true},{"title":"Add Squadron 2.0 Sport - Clear Wide Cornering","offer_id":52918049538264,"sku":"201202","price":645.0,"currency_code":"USD","in_stock":true},{"title":"Add Squadron 2.0 Sport - Amber Wide Cornering","offer_id":52918049571032,"sku":"201205","price":645.0,"currency_code":"USD","in_stock":true},{"title":"Add Squadron 2.0 Pro - Clear Driving\/Combo","offer_id":52546401206488,"sku":"201207","price":845.0,"currency_code":"USD","in_stock":true},{"title":"Add Squadron 2.0 Pro - Amber Driving\/Combo","offer_id":52546401239256,"sku":"201210","price":845.0,"currency_code":"USD","in_stock":true},{"title":"Add Squadron 2.0 Pro - Clear Wide Cornering","offer_id":52918049603800,"sku":"201208","price":845.0,"currency_code":"USD","in_stock":true},{"title":"Add Squadron 2.0 Pro - Amber Wide Cornering","offer_id":52918049636568,"sku":"201211","price":845.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/6980\/2902\/files\/DSC07883v2.jpg?v=1790300851"},{"product_id":"tiny-rig-co-gfc-rear-chase-light-mount-for-baja-designs-s1","title":"Tiny Rig Co | 1\/4 Chub Chase Light Mounts for GoFast Campers (GFC)","description":"\u003ch2\u003e1\/4 Chub Chase Light Mounts for GoFast Campers (GFC)\u003c\/h2\u003e\n\u003cp\u003eMounting chase or dust lights on a GoFast Camper usually means bolting to the extrusion or drilling through the door, and then you're stuck figuring out where the wire goes. Plenty of folks shove it between the door and the frame and call it good enough. We don't work that way. My brain can't handle something that sloppy.\u003c\/p\u003e\n\u003cp\u003eSo I walked over to the camper, looked at the strut mount hardware, and thought: flip it around and thread it into a mount. Our designer ran with it, we tested it, and it worked awesome.\u003c\/p\u003e\n\u003cp\u003eThen we made it look like it belongs. The pockets and lines come straight from design details already on the GFC, so the Chub looks like it was made right alongside the camper, not bolted on after.\u003c\/p\u003e\n\u003cp\u003eEach one is machined from a solid chunk of 6061 T6 aluminum, weighs a quarter pound (hence the name), and gets a black UV stable anodize so it won't fade.\u003c\/p\u003e\n\u003cp\u003eMounting the light is easy. Running Baja Designs S1s? Use the 1\/4-20 hardware Baja includes. Running S2s? Swap their hardware for a 1\/4-20 bolt and you're set.\u003c\/p\u003e\n\u003cp\u003eWe include a drill jig, so you know exactly where your wire goes. No guessing, no wire pinched in the door.\u003c\/p\u003e\n\u003cp\u003eTwo Chubs. Two holes. A whole lotta OCD lighting goodness.\u003c\/p\u003e\n\u003ch3\u003eChoose Your Setup\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBillet Mounts Only:\u003c\/strong\u003e bring your own S1, S2, or similar light.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdd Baja Designs S1 - Amber Wide Cornering:\u003c\/strong\u003e amber chase light that cuts through dust.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdd Baja Designs S1 - Clear Wide Cornering:\u003c\/strong\u003e wide clear beam for rear and side light.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdd Baja Designs S1 - Clear Work\/Scene:\u003c\/strong\u003e even flood for camp and work light behind the truck.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMounts to the existing GFC strut hardware, so no drilling into the extrusion or door\u003c\/li\u003e\n\u003cli\u003eMachined from solid 6061 T6 aluminum\u003c\/li\u003e\n\u003cli\u003eBlack UV-stable anodize that won't fade\u003c\/li\u003e\n\u003cli\u003eDrill template included for a clean wire pass-through\u003c\/li\u003e\n\u003cli\u003eDesign details matched to the GFC, so it looks factory\u003c\/li\u003e\n\u003cli\u003eDesigned and built by Tiny Rig Co\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamper mounting:\u003c\/strong\u003e existing GFC strut mounting hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 6061 T6 aluminum, machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e black anodize, UV stable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1\/4 lb each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight mount:\u003c\/strong\u003e 1\/4-20 threaded hole, 1 in deep\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits all GoFast Campers (GFC) Toppers and Platform campers, for both midsize and full-size trucks.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 x 1\/4 Chub mounts\u003c\/li\u003e\n\u003cli\u003e1 x double-sided 3D-printed drill template (labeled left and right)\u003c\/li\u003e\n\u003cli\u003e2 x rubber grommets for the wire pass-throughs\u003c\/li\u003e\n\u003cli\u003e2 x Baja Designs S1 lights (with any \"Add Baja Designs S1\" option)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003ePlan on about 1 to 2 hours (including time for wiring). You'll need medium-strength (blue) thread locker, a strap to hold the panel, a marker, a small drill bit, a 3\/8\" drill bit, a deburring tool and dry lube.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUnbolt the rear struts. You'll reuse these bolts to mount the chase light mounts.\u003c\/li\u003e\n\u003cli\u003eUse a strap to hold the panel up, since the struts aren't supporting it during the install.\u003c\/li\u003e\n\u003cli\u003eThe mounts are internally threaded and replace the nut. Flip the bolts around and put them through the panel from the inside.\u003c\/li\u003e\n\u003cli\u003eApply blue thread locker to the bolts and bolt the chase light mount to the panel.\u003c\/li\u003e\n\u003cli\u003ePlace the drill template on top of the mount. It's double sided and labeled \"Left\" and \"Right\", so make sure the correct side is facing you.\u003c\/li\u003e\n\u003cli\u003eMark your center point with a marker and drill a small pilot hole.\u003c\/li\u003e\n\u003cli\u003eOpen the hole up to 3\/8\" and deburr the edges.\u003c\/li\u003e\n\u003cli\u003eUse a little dry lube to install the grommet into the hole.\u003c\/li\u003e\n\u003cli\u003eInstall the light onto the mount with the 1\/4-20 screw and bracket from Baja Designs, using blue thread locker on the screw.\u003c\/li\u003e\n\u003cli\u003eFeed the wire through the grommet.\u003c\/li\u003e\n\u003cli\u003eRun your wires cleanly along the top tubing of the GFC and connect them to the switch or controller of your choice.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003ePairs With\u003c\/h3\u003e\n\u003cp\u003eConfirmed with Baja Designs S1 and S2. For S1s, use the 1\/4-20 hardware Baja includes. For S2s, swap in a 1\/4-20 bolt. Other similarly sized lights will work as well.\u003c\/p\u003e","brand":"Tiny Rig Co","offers":[{"title":"Billet Mounts Only","offer_id":52637991436504,"sku":"100700","price":95.0,"currency_code":"USD","in_stock":true},{"title":"Add Baja Designs S1 - Amber Wide Cornering","offer_id":52638393499864,"sku":"200702","price":354.95,"currency_code":"USD","in_stock":true},{"title":"Add Baja Designs S1 - Clear Wide Cornering","offer_id":52637991600344,"sku":"200701","price":354.95,"currency_code":"USD","in_stock":true},{"title":"Add Baja Designs S1 - Clear Work\/Scene","offer_id":52637991633112,"sku":"200703","price":354.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/6980\/2902\/files\/DSC09436.jpg?v=1791485350"},{"product_id":"ineos-grenadier-fog-light-brackets-with-baja-designs-s2-led-lights","title":"Tiny Rig Co | Fog Light Kit with Baja S2 SAE for INEOS Grenadier 2023+","description":"\u003ch2\u003eFog Light Kit with Baja Designs S2 SAE for INEOS Grenadier \u0026amp; Quartermaster\u003c\/h2\u003e\n\u003cp\u003eThe INEOS Grenadier and Quartermaster don't come with front fog lights from the factory, on any trim. When the weather turns or the road disappears, the headlights are all you've got. This kit fixes that: a purpose-built Tiny Rig Co mount paired with the street-legal Baja Designs S2 SAE, all in one box.\u003c\/p\u003e\n\u003cp\u003eThe brackets bolt to the factory mounting points at the bottom of the front bumper, near the tow hooks. That keeps the lights low and tucked in, where a fog beam belongs, with no drilling or cutting.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdds front fog lights your Grenadier or Quartermaster didn't ship with\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for the Grenadier and Quartermaster\u003c\/li\u003e\n\u003cli\u003eBolts on at factory mounting points, with no drilling or cutting\u003c\/li\u003e\n\u003cli\u003ePowder-coated stainless steel that stays solid on washboard roads without rattling or drooping\u003c\/li\u003e\n\u003cli\u003eLow, tucked-in mounting that looks factory\u003c\/li\u003e\n\u003cli\u003eStreet-legal Baja Designs S2 SAE fog beam\u003c\/li\u003e\n\u003cli\u003eWires to the included Baja Designs harness or your factory auxiliary switches\u003c\/li\u003e\n\u003cli\u003eDesigned and built by Tiny Rig Co\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAbout the Baja Designs S2 SAE\u003c\/h3\u003e\n\u003cp\u003eThe S2 SAE is the street-legal version of Baja Designs' popular S2. Its SAE-compliant beam throws a wide, low spread of light under fog, rain, snow and dust, with less glare bouncing back at you. It has a sealed housing and a hard-coated polycarbonate lens, and it's backed by Baja Designs' warranty. Available in clear or amber.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e2023+ INEOS Grenadier Station Wagon and Utility Wagon, including the Trialmaster and Fieldmaster Editions, and 2024+ INEOS Quartermaster.\u003c\/p\u003e\n\u003cp\u003eFits all factory bumpers and most aftermarket bumpers. Not sure about yours? Email us at \u003ca href=\"mailto:info@tinyrigco.com\"\u003einfo@tinyrigco.com\u003c\/a\u003e before ordering.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 x Tiny Rig Co fog light brackets\u003c\/li\u003e\n\u003cli\u003e2 x Baja Designs S2 SAE LED lights (clear or amber)\u003c\/li\u003e\n\u003cli\u003eCarriage bolts, split washers and nuts for mounting the lights\u003c\/li\u003e\n\u003cli\u003eBaja Designs wiring harness and switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eBolt-on, about 5 to 10 minutes to mount. Wiring time depends on how you connect the lights. The brackets reuse the factory Torx bolts at the bottom of the bumper.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eAssemble the lights and brackets fully before mounting. It's much easier than installing the brackets first. Start by attaching the Baja Designs bracket to each S2 SAE light.\u003c\/li\u003e\n\u003cli\u003ePush the supplied carriage bolt up through the underside of our bracket. Set the S2, on its Baja bracket, on the inside of our bracket, then add the split washer and nut on top.\u003c\/li\u003e\n\u003cli\u003eRemove the 2 Torx bolts on each side of the front bumper, near the tow hooks.\u003c\/li\u003e\n\u003cli\u003eMount each light and bracket assembly to the bumper with the factory Torx bolts.\u003c\/li\u003e\n\u003cli\u003eRoute the wires up into the engine bay behind the tow hook mounts.\u003c\/li\u003e\n\u003cli\u003eConnect them with the included Baja Designs harness and switch. You can also wire them into the Grenadier's factory auxiliary switch panel, the High Load Auxiliary Switch Panel (standard on the Trialmaster Edition, optional on other trims), or a controller of your choice.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003ePairs With\u003c\/h3\u003e\n\u003cp\u003eThis kit pairs with the Baja Designs S2 SAE, the version you need for on-road compliance. The bracket also fits the Baja Designs S2 Sport and S2 Pro, but those lights aren't street legal and are for off-road use only.\u003c\/p\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\n\u003cp\u003eCurrently on backorder while we wait on a new shipment from Baja Designs. Orders ship as soon as the lights arrive.\u003c\/p\u003e","brand":"Tiny Rig Co","offers":[{"title":"S2 SAE Clear","offer_id":52652439306456,"sku":"202400","price":364.12,"currency_code":"USD","in_stock":true},{"title":"S2 SAE Amber","offer_id":52652439470296,"sku":"202401","price":374.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/6980\/2902\/files\/DSC09594_62618278-ae68-45c1-9e29-c06c64edfa49.jpg?v=1791821927"},{"product_id":"tiny-rig-co-gmrs-radio-and-bracket-gme-or-rugged-for-toyota-tacoma-4th-gen","title":"Tiny Rig Co | GMRS Radio and Bracket GME or Rugged for Toyota Tacoma 4th Gen","description":"\u003ch2\u003e4th Gen Tacoma Hidden Center Console Radio Mount\u003c\/h2\u003e\n\u003cp\u003eKeep your comms and your wiring out of sight. This Tiny Rig Co bracket mounts inside the center console of your 4th Gen Tacoma, so your radio, fuse block and bus bar sit hidden and protected. Your dash stays clean, and nothing in the cab gives away what's installed.\u003c\/p\u003e\n\u003cp\u003eIt's made to be a complete power and comms hub. The bracket holds a Blue Sea fuse block and bus bar right next to the radio, so you get one tidy, fused distribution point instead of wires run all over the cab.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFits 2024+ Toyota Tacoma (4th Gen) only.\u003c\/strong\u003e It works with both hybrid (i-FORCE MAX) and non-hybrid models, but the bracket is different for each. Choose your Tacoma model when you order so you get the right one.\u003c\/p\u003e\n\u003ch3\u003eWhere It Mounts\u003c\/h3\u003e\n\u003cp\u003eThe bracket mounts to the inside of the back portion of your center console.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid (i-FORCE MAX):\u003c\/strong\u003e it sits in the space directly above the inverter, close to the battery, which keeps wire runs short and simple.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-hybrid:\u003c\/strong\u003e the location makes it clean and easy to add extra USB and fast-charging ports.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTiny Rig Co center console radio bracket for the 4th Gen Tacoma (hybrid or non-hybrid version)\u003c\/li\u003e\n\u003cli\u003eBlue Sea 5045 ST Blade Compact Fuse Block with cover\u003c\/li\u003e\n\u003cli\u003eBlue Sea 2315 Common 100A MiniBus bus bar\u003c\/li\u003e\n\u003cli\u003eRadio packages only: your choice of the GME XRS-330C-U or Rugged G2 Mini radio kit, including the radio unit and its handheld speaker mic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAntenna not included.\u003c\/strong\u003e Neither radio kit comes with an antenna, so you'll need one to transmit. For the GME, we carry the \u003ca href=\"\/products\/gme-lightweight-gmrs-antenna-2-1dbi-gain-ae4201-u\"\u003eGME Lightweight GMRS Antenna (AE4201-U)\u003c\/a\u003e and the \u003ca href=\"\/products\/gme-flexible-gmrs-antenna-4dbi-gain-ae4202-u\"\u003eGME Flexible GMRS Antenna (AE4202-U)\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eChoose Your Radio\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGME XRS-330C-U:\u003c\/strong\u003e A compact radio that stays hidden in the console.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRugged G2 Mini:\u003c\/strong\u003e A 30-watt mobile that gives you more range on the trail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBracket + Blue Sea Fuse Block \u0026amp; Bus Bar (No Radio):\u003c\/strong\u003e Already have a radio? Get the bracket, fuse block and bus bar without one.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRadio Details\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eGME XRS-330C-U\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5-watt super-compact mobile with an OLED display on the speaker mic\u003c\/li\u003e\n\u003cli\u003e15 GMRS channels plus 8 repeater channels, and 400 programmable receive-only channels\u003c\/li\u003e\n\u003cli\u003eBluetooth control from your phone through the GME XRS Connect app, with over-the-air updates\u003c\/li\u003e\n\u003cli\u003eIncludes the radio, speaker mic with magnetic mount, extension lead, 12V power lead and mounting hardware\u003c\/li\u003e\n\u003cli\u003e5-year GME warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRugged G2 Mini\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e30-watt output with high, medium and low power settings\u003c\/li\u003e\n\u003cli\u003e15 GMRS channels plus 10 repeater channels, with 259 privacy codes\u003c\/li\u003e\n\u003cli\u003eAll controls on a waterproof (IP67) hand mic with a magnetic mount; compact remote-mount radio body\u003c\/li\u003e\n\u003cli\u003eIncludes the radio, hand mic, U-bracket, fused DC power cable and hardware pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You'll Like It\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHidden install:\u003c\/strong\u003e your radio and electrical sit out of sight, which keeps the cab clean and makes the gear less of a target for theft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtected circuits:\u003c\/strong\u003e the Blue Sea fuse block and 100A bus bar give your accessories clean, fused power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits your truck:\u003c\/strong\u003e it's designed specifically for the 4th Gen Tacoma center console.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady to go:\u003c\/strong\u003e the bracket, power distribution and radio come together in one kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eNote: if you transmit on GMRS frequencies, you need an FCC license. One license covers your immediate family.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tiny Rig Co","offers":[{"title":"Non-Hybrid \/ GME XRS-330C-U","offer_id":52677855510744,"sku":"201000","price":513.12,"currency_code":"USD","in_stock":true},{"title":"Non-Hybrid \/ Rugged G2 Mini","offer_id":52677855543512,"sku":"201001","price":388.12,"currency_code":"USD","in_stock":true},{"title":"Hybrid (i-FORCE MAX) \/ GME XRS-330C-U","offer_id":52677855576280,"sku":"201010","price":513.12,"currency_code":"USD","in_stock":true},{"title":"Hybrid (i-FORCE MAX) \/ Rugged G2 Mini","offer_id":52677855609048,"sku":"201011","price":388.12,"currency_code":"USD","in_stock":true},{"title":"Non-Hybrid \/ Bracket + Blue Sea Kit (No Radio)","offer_id":52918630449368,"sku":"101000","price":138.0,"currency_code":"USD","in_stock":true},{"title":"Hybrid (i-FORCE MAX) \/ Bracket + Blue Sea Kit (No Radio)","offer_id":52918630482136,"sku":"101010","price":138.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/6980\/2902\/files\/DSC07658.jpg?v=1791922274"},{"product_id":"tiny-rig-co-gfc-topper-rear-wolfbox-camera-mount","title":"Tiny Rig Co | Wolfbox Rear Camera Mount for GFC Toppers","description":"\u003ch2\u003eWolfbox Rear Camera Mount for Go Fast Campers (GFC) Toppers\u003c\/h2\u003e\n\u003cp\u003eMost rearview camera installs in a GFC topper end one of two ways: extra holes drilled in a brand new topper, or a camera hanging off double-sided tape that gives up on the first hot day. Neither sat right with us, so we went looking for a better spot and found one that was already there.\u003c\/p\u003e\n\u003cp\u003eThis mount bolts to the backside of the factory third brake light, on the inside of the topper, using the same mounting points. The camera ends up tucked behind the rear window, out of the rain, dust and car wash, and the bracket lets you adjust its height and angle until the view is dialed. The camera cable follows the brake light wiring, so there's nothing new to route.\u003c\/p\u003e\n\u003cp\u003eWe laser cut and form each bracket from 5052 aluminum and finish it in black powder coat, so it blends into the topper instead of standing out. Longer bolts for the brake light mounting points come in the box, along with everything else you need for the install.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNo drilling and no tape: uses the factory third brake light mounting points\u003c\/li\u003e\n\u003cli\u003eCamera stays inside the topper, protected from the elements\u003c\/li\u003e\n\u003cli\u003eAdjustable height and angle\u003c\/li\u003e\n\u003cli\u003eLaser cut and formed 5052 aluminum, black powder coat\u003c\/li\u003e\n\u003cli\u003eDesigned and built by Tiny Rig Co\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and Camera Compatibility\u003c\/h3\u003e\n\u003cp\u003eFits all Go Fast Campers (GFC) toppers \u003cstrong\u003ewith a rear window\u003c\/strong\u003e, on both midsize and full-size trucks. Works with the Wolfbox G900 Tri-Pro and Wolfbox G930.\u003c\/p\u003e\n\u003cp\u003eIt does not fit GFC toppers without a rear window, GFC Platform campers, or other topper brands. If that's your setup, our \u003ca href=\"\/products\/tiny-rig-co-gfc-third-brake-light-with-wolfbox-camera-integration\"\u003eGFC Billet Third Brake Light with Wolfbox Camera Mount\u003c\/a\u003e builds the camera right into the brake light for a seamless, no-frills install.\u003c\/p\u003e\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x rear camera mounting bracket\u003c\/li\u003e\n\u003cli\u003eLonger replacement hardware for the third brake light mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Wolfbox camera is \u003cstrong\u003enot included\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003ePlan on about 15 minutes to mount the bracket. Wiring time will vary.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the factory hardware from your third brake light.\u003c\/li\u003e\n\u003cli\u003eSet the bracket against the backside of the third brake light, on the inside of the topper.\u003c\/li\u003e\n\u003cli\u003eReinstall using the longer hardware we provide.\u003c\/li\u003e\n\u003cli\u003eMount your Wolfbox camera and set the height and angle.\u003c\/li\u003e\n\u003cli\u003eRoute the camera cable alongside the third brake light wiring.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Tiny Rig Co","offers":[{"title":"Default Title","offer_id":52724058718424,"sku":"102000","price":67.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/6980\/2902\/files\/DSC08322.jpg?v=1792523091"},{"product_id":"tiny-rig-co-gfc-billet-aluminum-scene-light-mounts-for-baja-designs-rock-light","title":"Tiny Rig Co | Billet Scene Light Mount for Baja Designs Rock Lights","description":"\u003ch2\u003eBillet Scene Light Mount for Baja Designs Rock Lights\u003c\/h2\u003e\n\u003cp\u003eIf you run Baja on everything, you already know the Rock Light is a great little light. We wanted it working as a real scene light, throwing light out over the tailgate, the kitchen setup and the ground around the rig, so we built it a proper home.\u003c\/p\u003e\n\u003cp\u003eThe housing holds one Baja Designs Rock Light at a built-in 30-degree angle, aiming it outward to cover a wide area. It's a two-piece design: the cover hides the small assembly screws, so the finished light looks clean and flush instead of bolted together.\u003c\/p\u003e\n\u003cp\u003eEvery housing is CNC machined from 6061 billet aluminum, fine bead blasted for a smooth, even texture, then hard anodized with a UV-resistant coating so it holds up to sun, rain and dust.\u003c\/p\u003e\n\u003ch3\u003eMount It Almost Anywhere\u003c\/h3\u003e\n\u003cp\u003eTwo mounting holes are all it needs, so it goes on just about any flat surface: camper panels, extrusion, roof racks, bed racks or the side of a canopy. We include hardware for both common setups:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/4-20 screws and GFC nut inserts for mounting to GoFast Camper extrusion\u003c\/li\u003e\n\u003cli\u003eM5 screws, washers and nuts for racks, panels and other universal installs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoose Your Package\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBillet Mount + White Baja Rock Light:\u003c\/strong\u003e the complete scene light, ready to wire.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBillet Mount Only:\u003c\/strong\u003e for when you already own a Rock Light, or want red, amber or another color. Pick up the Baja Designs Rock Light in the color you like and drop it in.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x billet aluminum scene light housing\u003c\/li\u003e\n\u003cli\u003e4 x stainless steel M4 screws to assemble the housing\u003c\/li\u003e\n\u003cli\u003e1\/4-20 screws and GFC nut inserts\u003c\/li\u003e\n\u003cli\u003eM5 screws, washers and nuts\u003c\/li\u003e\n\u003cli\u003e1 x white Baja Designs Rock Light (Mount + Light package only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e CNC machined 6061 billet aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e fine bead blast, hard anodized with UV-resistant coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight angle:\u003c\/strong\u003e built-in 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e one Baja Designs Rock Light per housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e 2 holes, universal fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eAssembly and mounting take just a few minutes. Wiring time depends on where you mount it and how you want to switch it.\u003c\/p\u003e\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Tiny Rig Co","offers":[{"title":"Billet Mount + White Baja Rock Light","offer_id":52860651503832,"sku":"202700","price":147.0,"currency_code":"USD","in_stock":true},{"title":"Billet Mount Only","offer_id":52860651536600,"sku":"102700","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/6980\/2902\/files\/DSC09826v2.jpg?v=1792547442"},{"product_id":"tiny-rig-co-gfc-billet-aluminum-adjustable-interior-light","title":"Tiny Rig Co | GoFluxx 12\" Interior Light Mount for GFC Campers","description":"\u003ch2\u003eGoFluxx 12\" Interior Light Mount for Go Fast Campers (GFC)\u003c\/h2\u003e\n\u003cp\u003eCooking at the tailgate, digging for the headlamp you swear you packed, getting the bed set up after dark: all of it goes better with real light inside the camper. The GoFluxx 12\" Tri-Color strip is one of our favorite lights for the job, so we built a housing that makes it look like it came with your GFC.\u003c\/p\u003e\n\u003cp\u003eIt mounts behind the factory third brake light, using longer screws we include, so there's nothing new to drill. It also works with our \u003ca href=\"\/products\/tiny-rig-co-gfc-third-brake-light-with-wolfbox-camera-integration\"\u003eGFC Billet Third Brake Light with Wolfbox Camera Mount\u003c\/a\u003e, so you can run both.\u003c\/p\u003e\n\u003ch3\u003eSwivel It In or Out\u003c\/h3\u003e\n\u003cp\u003eThe light is built on a swivel. With the rear door of your camper or topper open, you can turn it toward the interior to light up the bed, or swing it out to light the whole tailgate. That's something the camper's built-in lighting kit can't do, and it makes a big difference when you're cooking and setting up camp after dark.\u003c\/p\u003e\n\u003cp\u003eBecause it's tri-color, you can switch to red at night to preserve your night vision and keep the bugs away. And it's a perfect match for the rest of the interior lighting in your GFC, so it looks like it belongs there.\u003c\/p\u003e\n\u003ch3\u003eHow It's Made\u003c\/h3\u003e\n\u003cp\u003eThe light housing is machined from billet 6061 aluminum, bead blasted and finished in a UV-resistant hard coat. The brackets are laser cut stainless steel, CNC bent and formed, then black powder coated.\u003c\/p\u003e\n\u003ch3\u003eAbout the GoFluxx Light\u003c\/h3\u003e\n\u003cp\u003eThe included GoFluxx 12\" Tri-Color LED Strip gives you white for full brightness, red to protect your night vision, and amber for a softer light that draws fewer bugs. It's dimmable, IP67 rated, runs on 12V, and remembers your last setting even when it's wired to a main switch.\u003c\/p\u003e\n\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\n\u003cp\u003eAll Go Fast Campers toppers and Platform campers, with or without windows. Fits V1, V2, V2 Pro and V2 Pro Max, on midsize and full-size trucks.\u003c\/p\u003e\n\u003ch3\u003eWhat You Get\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x billet aluminum light housing with swiveling stainless bracket\u003c\/li\u003e\n\u003cli\u003e1 x GoFluxx 12\" Tri-Color LED Strip\u003c\/li\u003e\n\u003cli\u003eLonger screws for mounting behind the third brake light\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Tiny Rig Co","offers":[{"title":"Default Title","offer_id":52726347006168,"sku":"200800","price":167.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/6980\/2902\/files\/DSC09859.jpg?v=1792547152"},{"product_id":"tiny-rig-co-renogy-back-pack-with-bluesea-safety-hub","title":"Tiny Rig Co | Dual Battery Charging Hub with Renogy 30A DC-DC \u0026 Blue Sea SafetyHub","description":"\u003cp\u003e\u003cstrong\u003eCurrently sold out.\u003c\/strong\u003e \u003ca href=\"\/pages\/contact-us\"\u003eContact us\u003c\/a\u003e to get on the list for the next batch.\u003c\/p\u003e\n\u003ch2\u003eDual Battery Charging Hub with Renogy 30A DC-DC Charger, BT-2 and Blue Sea SafetyHub 150\u003c\/h2\u003e\n\u003cp\u003eTurn your truck into a capable mini camper with one simple, compact power kit. If you're building out a Toyota Tacoma or a similar truck with a Go Fast Camper or another topper, this kit gives you everything you need to run a secondary house battery. Your fridge, lights and accessories run off the house battery, and your starting battery stays protected.\u003c\/p\u003e\n\u003cp\u003eThe components come pre-matched and ready to mount on a Tiny Rig Co bracket designed specifically for them:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRenogy 12V 30A DC-DC Charger with MPPT:\u003c\/strong\u003e Charges your house battery from your truck's alternator while you drive. It also has a built-in MPPT solar controller, so you can add solar panels and keep charging at camp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRenogy BT-2 Bluetooth Module:\u003c\/strong\u003e Lets you monitor charging and battery status from your phone through the Renogy app.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Sea Systems SafetyHub 150:\u003c\/strong\u003e A fused distribution hub that powers all your camp accessories cleanly and safely.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach component has its own dedicated position on the bracket. You don't have to source parts separately, drill or zip-tie anything into place. You get a clean, professional install with short wire runs, and everything stays easy to reach when you need to check a fuse or a connection.\u003c\/p\u003e\n\u003ch3\u003eTwo Components, One Unit\u003c\/h3\u003e\n\u003cp\u003eA dual battery charging setup usually means finding room for a charger and a fuse block separately, then wiring between them. This unit puts both on one bracket, so they take up the space of one component instead of two. That simplifies the wiring and makes it much easier to fit the whole setup into tight spaces.\u003c\/p\u003e\n\u003cp\u003eAround the shop, we call it the Renogy Backpack: everything your second battery needs, packed onto one bracket and ready to go wherever you mount it.\u003c\/p\u003e\n\u003ch3\u003eArrives Assembled and Ready to Wire\u003c\/h3\u003e\n\u003cp\u003eThe unit comes completely assembled, with a power and ground cable already connected between the components. Getting your second battery charging comes down to two connections:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eConnect your auxiliary battery's positive and ground to the Blue Sea SafetyHub.\u003c\/li\u003e\n\u003cli\u003eConnect your starting battery positive and a common ground to the Renogy DC-DC charger.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWhy You'll Love It\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA complete power kit for alternator charging, solar charging and power distribution\u003c\/li\u003e\n\u003cli\u003eProven components from Renogy and Blue Sea Systems\u003c\/li\u003e\n\u003cli\u003eCompact footprint for truck camper builds\u003c\/li\u003e\n\u003cli\u003eReady for solar whenever you want to add it\u003c\/li\u003e\n\u003cli\u003eOrganized, serviceable wiring\u003c\/li\u003e\n\u003cli\u003eAluminum bracket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Mount it on MOLLE plates, electrical panels or inside an electrical box setup.\u003c\/p\u003e\n\u003ch3\u003eBracket Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 5052 aluminum, laser cut and CNC formed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e raw\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Tiny Rig Co mounting bracket, fully assembled with the components below\u003c\/li\u003e\n\u003cli\u003e(1) Renogy 12V 30A DC-DC On-Board Battery Charger with MPPT (SKU: RBC30D1S-BT-US)\u003c\/li\u003e\n\u003cli\u003e(1) Renogy BT-2 Bluetooth Module\u003c\/li\u003e\n\u003cli\u003e(1) Blue Sea Systems SafetyHub 150\u003c\/li\u003e\n\u003cli\u003ePre-connected power and ground cable between the components\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e The house battery, solar panels, battery cables and fuses are \u003cstrong\u003enot included\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall time varies depending on your setup.\u003c\/p\u003e","brand":"Tiny Rig Co","offers":[{"title":"Default Title","offer_id":52756646068440,"sku":"102600","price":593.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/6980\/2902\/files\/DSC09808.jpg?v=1792602726"},{"product_id":"tiny-rig-co-illuminated-grab-handle-for-tacoma-4th-gen","title":"Tiny Rig Co | Illuminated Grab Handle for Tacoma 4th Gen 2024+","description":"\u003ch2\u003eIlluminated Grab Handle for 4th Gen Toyota Tacoma\u003c\/h2\u003e\n\u003cp\u003eBring functional lighting and machined durability to your 4th Gen Tacoma with the Tiny Rig Co Illuminated Grab Handle. It's a direct replacement for the factory front passenger grab handle. This billet aluminum upgrade adds clean, controllable lighting to your cab.\u003c\/p\u003e\n\u003cp\u003eThe handle has a built-in tri-color dimmable light with red, amber and white output. You control the color and brightness directly from the handle, so you can switch from bright task lighting to low-glare night lighting without reaching for a separate controller.\u003c\/p\u003e\n\u003cp\u003eThe handle is machined from 6061 aluminum and finished in blasted black anodize, so it looks clean and factory-style while adding real utility. A TRC logo detail on the face of the handle gives it a purpose-built look that matches the Tacoma's rugged interior.\u003c\/p\u003e\n\u003cp\u003eIt mounts directly to the factory grab handle location and includes black-coated stainless hardware. The light runs on 12V and comes with a short harness. You can extend the harness and wire it to your secondary battery, auxiliary switch system or lighting control system.\u003c\/p\u003e\n\u003cp\u003eThe light fixes weak factory map lighting and gives you usable light while camping. It also improves interior lighting when you're hanging out or sleeping in the truck.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits 4th Gen Toyota Tacoma (2024+)\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the factory front passenger grab handle\u003c\/li\u003e\n\u003cli\u003eMachined 6061 billet aluminum construction\u003c\/li\u003e\n\u003cli\u003eBlasted black anodized finish\u003c\/li\u003e\n\u003cli\u003eBuilt-in tri-color dimmable light: red, amber and white\u003c\/li\u003e\n\u003cli\u003eDimming and color control built into the handle\u003c\/li\u003e\n\u003cli\u003e12V powered\u003c\/li\u003e\n\u003cli\u003eShort wiring harness for extension to a secondary battery, auxiliary switch or lighting control system\u003c\/li\u003e\n\u003cli\u003eBlack-coated stainless hardware\u003c\/li\u003e\n\u003cli\u003eMounts directly to the factory location\u003c\/li\u003e\n\u003cli\u003eSold individually\u003c\/li\u003e\n\u003cli\u003eDesigned and built by Tiny Rig Co\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest Uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBetter interior map lighting\u003c\/li\u003e\n\u003cli\u003eCamp lighting inside the cab\u003c\/li\u003e\n\u003cli\u003eLow-glare red or amber lighting at night\u003c\/li\u003e\n\u003cli\u003eSleeping or relaxing in the truck\u003c\/li\u003e\n\u003cli\u003eClean, OEM-style interior lighting upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e2024+ Toyota Tacoma (4th Gen). This handle replaces the \u003cstrong\u003efront passenger\u003c\/strong\u003e grab handle only. The 4th Gen Tacoma has one compatible handle location, so the handle is sold individually.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIlluminated grab handle with integrated tri-color light\u003c\/li\u003e\n\u003cli\u003eStainless mounting hardware with black coating\u003c\/li\u003e\n\u003cli\u003eShort 12V wiring harness\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eMounts directly to the factory front passenger grab handle location.\u003c\/p\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\n\u003cp\u003eArriving in stock next week. Orders ship as soon as stock arrives.\u003c\/p\u003e","brand":"Tiny Rig Co","offers":[{"title":"Default Title","offer_id":52758114795736,"sku":"102900","price":230.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/6980\/2902\/files\/DSC09745.jpg?v=1791915407"},{"product_id":"tiny-rig-co-baja-designs-xl-light-bar-for-ineos-grenadier-silenus-roof-conversion","title":"Tiny Rig Co | Grenadier Silenus Light Bar Kit with Baja Designs 8XL Sport","description":"\u003ch2\u003eIneos Grenadier Alu-Cab Silenus Light Bar Kit: Tiny Rig Co Brackets + Baja Designs 8XL Sport Linkable LED\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eLight up the trail ahead without changing the lines of your Grenadier.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTiny Rig Co built this bracket for Ineos Grenadiers with the Alu-Cab Silenus roof conversion. It pairs with the Baja Designs 8XL Sport Linkable LED light bar, giving you eight independently aimable lights and over 25,000 lumens on the front of your roof. The bracket mounts directly to the front top tracks of the Silenus roof, so the light bar sits tight and clean and looks factory-installed.\u003c\/p\u003e\n\u003ch3\u003eWhy You'll Want It\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for the Silenus.\u003c\/strong\u003e It bolts directly into the front top tracks of the Silenus roof using M8 carriage bolts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean, integrated look.\u003c\/strong\u003e The bar tucks in close to the roofline, so you get less wind noise and a factory-style finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight lights, aimed your way.\u003c\/strong\u003e Each light tilts up or down 45° and turns side to side. You can run them straight or in an arc for wide side-to-side coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last.\u003c\/strong\u003e The brackets are 304 stainless steel with a black powder coat.\u003c\/li\u003e\n\u003cli\u003eDesigned and built by Tiny Rig Co\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eINEOS Grenadier with the \u003cstrong\u003eAlu-Cab Silenus roof conversion only\u003c\/strong\u003e. Does not fit standard Grenadiers without the Silenus roof conversion, or other roof racks and conversions.\u003c\/p\u003e\n\u003ch3\u003eBracket Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e black powder coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e front top tracks of the Silenus roof, with M8 carriage bolts and nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBaja Designs 8XL Sport Linkable Light Bar Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e8 lights \/ 32 LEDs\u003c\/li\u003e\n\u003cli\u003e25,200 lumens, 208 W, 16 A\u003c\/li\u003e\n\u003cli\u003eLength 51.5\"\u003c\/li\u003e\n\u003cli\u003eMulti-pattern beam that lights the road near and far plus both sides\u003c\/li\u003e\n\u003cli\u003e5000K daylight color to reduce eye fatigue\u003c\/li\u003e\n\u003cli\u003eCast aluminum housing, hardcoated polycarbonate lenses, 6061 aluminum links\u003c\/li\u003e\n\u003cli\u003eIP69K waterproof (submersible to 9 ft, pressure-washable), IK10 impact rated\u003c\/li\u003e\n\u003cli\u003eBaja Designs limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBracket Only:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTiny Rig Co Grenadier Silenus light bar brackets\u003c\/li\u003e\n\u003cli\u003eM8 carriage bolts, nuts and all mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWith Baja Designs 8XL Light Bar:\u003c\/strong\u003e everything above, plus\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBaja Designs 8XL Sport Linkable 8-light bar (P\/N 740006)\u003c\/li\u003e\n\u003cli\u003eBaja Designs wiring harness\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eUnder 30 minutes to mount. Wiring time will vary. The brackets install into the Silenus roof's front top tracks using the supplied M8 carriage bolts and nuts.\u003c\/p\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBracket Only:\u003c\/strong\u003e in stock and ready to ship.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWith Baja Designs 8XL Light Bar:\u003c\/strong\u003e ships in about 2 weeks.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tiny Rig Co","offers":[{"title":"Bracket Only","offer_id":52897597259992,"sku":"101700","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Add Baja Designs 8XL Linkable Light Bar","offer_id":52897597292760,"sku":"201700","price":2381.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/6980\/2902\/files\/DSC09702withlights.jpg?v=1792700832"},{"product_id":"tiny-rig-co-alu-cab-billet-aluminum-adjustable-interior-light","title":"Tiny Rig Co | GoFluxx 12\" Interior Light Mount for Alu-Cab Canopies","description":"\u003ch2\u003eTiny Rig Co GoFluxx 12\" Light Housing for Alu-Cab\u003c\/h2\u003e\n\u003cp\u003eThe Tiny Rig Co GoFluxx 12\" Light Housing is a billet aluminum mount for the GoFluxx 12\" Tri-Color LED Strip. It's a direct upgrade for Alu-Cab Contour Canopies and ModCAPs that replaces the factory National Luna swivel lights. The housing mounts to the National Luna swivel bracket Alu-Cab already installed, so there's no drilling and no new brackets. Use it for cooking at the tailgate, digging through gear after dark or lighting up the canopy for the night.\u003c\/p\u003e\n\u003cp\u003eEach housing is CNC machined from billet 6061 aluminum, bead blasted and finished in a UV-resistant hard coat. An adjustable bracket lets you aim the light where you need it, whether that's down into the bed or out over your workspace.\u003c\/p\u003e\n\u003cp\u003eThe GoFluxx strip gives you three colors in one light. Use white for full brightness, red to keep your night vision, or amber for a softer light that draws fewer bugs. Dimming is built in.\u003c\/p\u003e\n\u003ch3\u003eWhat You Gain Over the National Luna Light\u003c\/h3\u003e\n\u003cp\u003eYou keep the swivel you're used to, since our housing sits on the same National Luna swivel bracket. What changes is the light itself. The factory National Luna light has no color options and no dimming. The GoFluxx gives you white, red and amber, plus dimming, so you can go from full brightness for setting up camp to a low red glow at night without swapping anything.\u003c\/p\u003e\n\u003ch3\u003eHousing Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCNC machined from billet 6061 aluminum\u003c\/li\u003e\n\u003cli\u003eBead blasted with a UV-resistant hard coat\u003c\/li\u003e\n\u003cli\u003eLaser cut stainless steel bracket, CNC bent and formed, black powder coat\u003c\/li\u003e\n\u003cli\u003eAdjustable bracket to aim the light\u003c\/li\u003e\n\u003cli\u003eMounts to the factory National Luna swivel bracket in Alu-Cab Contour Canopies and ModCAPs\u003c\/li\u003e\n\u003cli\u003eNo drilling required\u003c\/li\u003e\n\u003cli\u003eDesigned to fit the GoFluxx 12\" Tri-Color LED Strip\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGoFluxx 12\" Tri-Color LED Strip Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWhite, red and amber modes\u003c\/li\u003e\n\u003cli\u003eBuilt-in dimming\u003c\/li\u003e\n\u003cli\u003eIP67 rated for indoor or outdoor use\u003c\/li\u003e\n\u003cli\u003e12VDC powered\u003c\/li\u003e\n\u003cli\u003eRemembers your last mode, even when power is cut or it's wired to a main switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eAlu-Cab Contour Canopies and ModCAPs with the factory National Luna swivel light bracket.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x Billet aluminum light housing with adjustable bracket\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eGoFluxx 12\" Tri-Color LED Strip\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eIt takes just minutes. Unbolt the factory National Luna light, bolt ours in its place, and connect it to the existing National Luna wiring.\u003c\/p\u003e\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Tiny Rig Co","offers":[{"title":"Default Title","offer_id":52825970180312,"sku":"100800","price":143.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/6980\/2902\/files\/DSC09850.jpg?v=1793136512"},{"product_id":"tiny-rig-co-billet-flush-mount-air-chuck-for-arb","title":"Tiny Rig Co | Billet Recessed ARB Air Chuck Flush Mount","description":"\u003ch2\u003eBillet Aluminum Flush Mount for the ARB Air Chuck (0740111)\u003c\/h2\u003e\n\u003cp\u003ePut your onboard air right where you need it, with a clean, factory-looking finish. The Tiny Rig Co Recessed Air Chuck Flush Mount is machined from solid billet aluminum and made to fit the ARB Hose Coupling US STD JIC-4 (part number 0740111), the most popular ARB air chuck. It sets the chuck flush into your bumper, bed, camper or panel, so you can air up fast without a hose fitting sticking out to snag or rattle.\u003c\/p\u003e\n\u003cp\u003eEach mount is bead blasted to a smooth finish, then anodized to stand up to trail rash, weather and years of use. Choose silver with a clear anodize, or grey with a mil-spec anodize coating. The logo and text are laser etched, so they won't peel or fade.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMachined from billet 6061 aluminum\u003c\/li\u003e\n\u003cli\u003eMade for the ARB 0740111 air chuck\u003c\/li\u003e\n\u003cli\u003eRecessed, flush-mount design for a clean, low-profile look\u003c\/li\u003e\n\u003cli\u003eSmooth bead-blast finish\u003c\/li\u003e\n\u003cli\u003eTwo finishes: silver (clear anodize) or grey (mil-spec anodize)\u003c\/li\u003e\n\u003cli\u003eLaser-etched logo and text\u003c\/li\u003e\n\u003cli\u003eMounts with 3 screw holes, so there's no sandwich plate and no minimum panel thickness\u003c\/li\u003e\n\u003cli\u003eAvailable on its own or bundled with the ARB 0740111 chuck\u003c\/li\u003e\n\u003cli\u003eDesigned and built by Tiny Rig Co\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eCompatible only with the \u003cstrong\u003eARB Hose Coupling US STD JIC-4, part number 0740111\u003c\/strong\u003e. That's ARB's US industrial standard (ISO 6150 B) air chuck with a JIC-4 37-degree flare fitting and an M18 panel mount. It connects to your ARB compressor with ARB's 07402XX series braided hose.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMount Only:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x billet recessed air chuck flush mount\u003c\/li\u003e\n\u003cli\u003eM5 countersunk screws, washers and nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMount + ARB Chuck:\u003c\/strong\u003e everything above, plus\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x ARB Hose Coupling US STD JIC-4 (0740111)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eYou'll need a 1.89\" (48 mm) hole. A 48 mm hole saw gives you the exact fit. The mount attaches through 3 mounting screw holes, so it works on panels of any thickness. Use the included M5 countersunk screws, washers and nuts, or countersunk rivets if you prefer.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0517\/6980\/2902\/files\/DSC09961.jpg?v=1793310652\" alt=\"Tiny Rig Co billet recessed ARB air chuck flush mount\"\u003e\u003c\/p\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\n\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Tiny Rig Co","offers":[{"title":"Silver \/ Mount Only","offer_id":52839747846360,"sku":"101800","price":63.0,"currency_code":"USD","in_stock":true},{"title":"Grey \/ Mount Only","offer_id":52839747879128,"sku":"101801","price":63.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Mount + ARB Chuck","offer_id":52898159591640,"sku":"201800","price":81.95,"currency_code":"USD","in_stock":true},{"title":"Grey \/ Mount + ARB Chuck","offer_id":52898159624408,"sku":"201802","price":81.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/6980\/2902\/files\/DSC09944.jpg?v=1793310640"},{"product_id":"tiny-rig-co-stainless-a-pillar-ditch-light-bracket-for-tacoma-4th-gen-2024","title":"Tiny Rig Co | Stainless A-Pillar Ditch Light Brackets for 2024+ Tacoma","description":"\u003ch2\u003eStainless A-Pillar Ditch Light Brackets for Toyota Tacoma 4th Gen (2024+)\u003c\/h2\u003e\n\u003cp\u003ePut light where the trail actually needs it. These ditch light brackets for the 4th Generation Toyota Tacoma mount a pair of pod lights at the base of the windshield, throwing light wide into the corners, switchbacks and shoulders your headlights miss.\u003c\/p\u003e\n\u003cp\u003eEach bracket is laser cut from .187\" (3\/16\") stainless steel. It won't flex, rattle or shake your lights out of aim on washboard roads, and it won't rust or need repainting after a season of mud, salt and car washes. The low-profile design sits tight to the A-pillar, does not obstruct the front windshield like some other ditch lights, and minimizes hood glare, so it looks like it came from Toyota.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision laser cut from .187\" (3\/16\") stainless steel\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant, with no coating to chip or peel\u003c\/li\u003e\n\u003cli\u003eDirect fit for the 2024+ Toyota Tacoma (4th Gen)\u003c\/li\u003e\n\u003cli\u003eBolt-on install using factory mounting points, no drilling\u003c\/li\u003e\n\u003cli\u003eLow-profile design that follows the lines of the truck\u003c\/li\u003e\n\u003cli\u003eDesigned and built by Tiny Rig Co\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e2024+ Toyota Tacoma (4th Gen), all trims and years. No exclusions.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 x stainless A-pillar brackets (driver and passenger)\u003c\/li\u003e\n\u003cli\u003eNew M6 button-head mounting hardware\u003c\/li\u003e\n\u003cli\u003eLights not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eA simple 10-minute install with a 10mm socket and ratchet.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePull back the rubber trim to expose the M6 fender bolt.\u003c\/li\u003e\n\u003cli\u003eRemove the bolt, align the bracket, and tighten the new M6 bolt into place.\u003c\/li\u003e\n\u003cli\u003eMount your light on the bracket.\u003c\/li\u003e\n\u003cli\u003eRun the wires into the engine bay under the rubber trim.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003ePairs With\u003c\/h3\u003e\n\u003cp\u003eDesigned around Baja Designs S1, S2, Squadron and Squadron 2.0 pods. Similar-size pods from Diode Dynamics, KC HiLiTES, Morimoto and others also fit.\u003c\/p\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\n\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Tiny Rig Co","offers":[{"title":"Default Title","offer_id":52852656931032,"sku":"101300","price":74.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/6980\/2902\/files\/DSC09933.jpg?v=1793397110"},{"product_id":"tiny-rig-co-stainless-a-pillar-ditch-light-bracket-for-4runner-6th-gen-2025","title":"Tiny Rig Co | Stainless A-Pillar Ditch Light Brackets for 2025+ 4Runner","description":"\u003ch2\u003eStainless A-Pillar Ditch Light Brackets for Toyota 4Runner 6th Gen (2025+)\u003c\/h2\u003e\n\u003cp\u003eLight up the edges of the trail, not just what's straight ahead. These brackets mount a pair of pod lights at the base of the windshield, casting wide light into the corners, washouts and shoulders your headlights can't reach.\u003c\/p\u003e\n\u003cp\u003eEach bracket is laser cut from .187\" (3\/16\") stainless steel, so it stays solid and keeps your lights aimed true over corrugated roads and rocky climbs. Stainless means no rust and no coating to chip, even after seasons of mud, snow and road salt.\u003c\/p\u003e\n\u003cp\u003eThe low-profile design hugs the A-pillar and follows the lines of the truck, with minimal windshield obstruction and minimal hood glare. It looks like a factory upgrade, not an add-on.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision laser cut from .187\" (3\/16\") stainless steel\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant, with no coating to chip or peel\u003c\/li\u003e\n\u003cli\u003eDirect fit for the 2025+ Toyota 4Runner (6th Gen)\u003c\/li\u003e\n\u003cli\u003eBolt-on install using factory mounting points, no drilling\u003c\/li\u003e\n\u003cli\u003eLow-profile design with minimal windshield obstruction and hood glare\u003c\/li\u003e\n\u003cli\u003eDesigned and built by Tiny Rig Co\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e2025+ Toyota 4Runner (6th Gen), all trims and years. No exclusions.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 x stainless A-pillar brackets (driver and passenger)\u003c\/li\u003e\n\u003cli\u003eNew M6 button-head mounting hardware\u003c\/li\u003e\n\u003cli\u003eLights not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eA simple 10-minute install with a 10mm socket and ratchet.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePull back the rubber trim to expose the M6 fender bolt.\u003c\/li\u003e\n\u003cli\u003eRemove the bolt, align the bracket, and tighten the new M6 bolt into place.\u003c\/li\u003e\n\u003cli\u003eMount your light on the bracket.\u003c\/li\u003e\n\u003cli\u003eRun the wires into the engine bay under the rubber trim.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003ePairs With\u003c\/h3\u003e\n\u003cp\u003eDesigned around Baja Designs S1, S2, Squadron and Squadron 2.0 pods. Similar-size pods from Diode Dynamics, KC HiLiTES, Morimoto and others also fit.\u003c\/p\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\n\u003cp\u003eIn stock and ready to ship.\u003c\/p\u003e","brand":"Tiny Rig Co","offers":[{"title":"Default Title","offer_id":52852961837272,"sku":"101300","price":74.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/6980\/2902\/files\/DSC09933.jpg?v=1793397110"}],"url":"https:\/\/tinyrigco.com\/collections\/tiny-rig-co-products.oembed","provider":"Tiny Rig Co","version":"1.0","type":"link"}