{"product_id":"baja-designs-upfitter-harness-2024-toyota-tacoma","title":"Baja Designs Upfitter Harness for 2024+ Toyota Tacoma","description":"\u003ch2\u003eBaja Designs Upfitter Harness for 2024+ Toyota Tacoma\u003c\/h2\u003e\n\u003cp\u003eYour Tacoma already has a spot set aside for aux lighting. Toyota left a 5-wire upfitter connector behind the driver-side headlight, tied off with electrical tape. This Baja Designs harness (part 600101) plugs right into it. Once it's in, your Baja lights run off the truck's factory upfitter switches, so you don't need to add an aftermarket toggle switch.\u003c\/p\u003e\n\u003cp\u003eThe harness splits the upfitter connector into three separate circuits. That means you can run up to three Baja light setups, each on its own switch. For example, you could put vent lights on one switch, ditch lights on another and grille lights on the third.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003e\u003cstrong\u003eBefore you order:\u003c\/strong\u003e\u003c\/span\u003e this harness only works on a Tacoma that has the factory auxiliary switches in the dash. Please check that your truck has them before purchasing. See the fitment notes below.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlugs into the factory 5-wire upfitter connector with no cutting or splicing\u003c\/li\u003e\n\u003cli\u003eThree auxiliary circuits: Aux 1 (red), Aux 2 (yellow) and Aux 3 (white)\u003c\/li\u003e\n\u003cli\u003eConnects to a standard Baja Designs light harness through the harness's switch lead\u003c\/li\u003e\n\u003cli\u003eIncludes three 4-pin red couplers for Baja harnesses that use the red switch connector\u003c\/li\u003e\n\u003cli\u003eBacked by Baja Designs' limited lifetime warranty against manufacturer defects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and Factory Aux Switches\u003c\/h3\u003e\n\u003cp\u003eMade for the 2024-2026 Toyota Tacoma (4th Gen) \u003cstrong\u003ewith factory auxiliary switches\u003c\/strong\u003e. Which trucks have them depends on the trim and package:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTRD Pro and Trailhunter:\u003c\/strong\u003e pre-wired factory aux switches come standard in the dash.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTRD Off-Road:\u003c\/strong\u003e generally included with the Premium package and higher builds, but it can vary by model year and package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSR, SR5, TRD PreRunner and TRD Sport:\u003c\/strong\u003e usually not included, though some trucks with premium packages have them.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure what your truck has? Look for the aux switch buttons on your dash, or give us a call at \u003ca href=\"tel:+16574002009\"\u003e(657) 400-2009\u003c\/a\u003e and we'll help you check before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 2024-On Toyota Tacoma Upfitter Harness (60-0101)\u003c\/li\u003e\n\u003cli\u003e(3) 1\/8\" 4-pin red couplers (20-0111)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou'll also need a Baja Designs light kit with its own harness. This harness connects that kit to your factory switches. It doesn't replace the light harness.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003ePlan on about 1 to 2 hours. You'll need a 10mm socket, a sharp blade, a pick and some zip ties.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDisconnect the negative battery terminal.\u003c\/li\u003e\n\u003cli\u003eFind the factory upfitter connector behind the driver-side headlight. It's taped back against the harness.\u003c\/li\u003e\n\u003cli\u003ePlug the upfitter harness into the factory connector.\u003c\/li\u003e\n\u003cli\u003eRemove the switch lead from your Baja Designs light harness. If it uses the 4-pin red connector, swap in the included red couplers.\u003c\/li\u003e\n\u003cli\u003eConnect the light harness to Aux 1, 2 or 3, plug in your lights, then reconnect the battery and test.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFor the full step-by-step, see the \u003ca href=\"https:\/\/www.bajadesigns.com\/wp-content\/uploads\/Installation%20Instructions\/FGXX_600101-INS_001.pdf\" rel=\"noopener\" target=\"_blank\"\u003eofficial Baja Designs installation instructions (PDF)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eRather have us do it? We wire Tacoma lighting in our shop all the time. Check out our \u003ca href=\"\/pages\/services\"\u003einstallation services\u003c\/a\u003e or call us at \u003ca href=\"tel:+16574002009\"\u003e(657) 400-2009\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eBaja Designs Lighting for Your 2024+ Tacoma\u003c\/h3\u003e\n\u003cp\u003eHere are the Baja Designs light kits we carry for the 4th Gen Tacoma. The first two are built around Tiny Rig Co mounts we design and make in-house.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/tiny-rig-co-billet-vent-pod-lights-for-baja-designs-squadron-2-0-toyota-tacoma-4th-gen\"\u003eBillet Vent Light Mounts with Squadron 2.0 lights\u003c\/a\u003e for the factory bumper vents\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/tiny-rig-co-squadron-2-0-ditch-light-kit-for-2024-tacoma\"\u003eSquadron 2.0 A-Pillar Ditch Light Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/toyota-s1-vent-kit-2024-2026-toyota-tacoma\"\u003eS1 Vent Light Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/toyota-s8-10-light-bar-s2-pro-trd-pro-grille-conversion-light-kit-2024-2026-toyota-tacoma\"\u003eS8\/S2 Pro Grille Conversion Light Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/s8-10-inch-s2-pro-grille-light-kit-2024-2026-toyota-tacoma-trd-pro\"\u003eS8\/S2 Pro Grille Light Kit for the TRD Pro\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cp\u003eOrders typically ship within 1 week.\u003c\/p\u003e","brand":"Baja Designs","offers":[{"title":"Default Title","offer_id":53132479824088,"sku":"600101","price":60.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/6980\/2902\/files\/600101_A__46420.1719359248.1280.1280__84361.1719421574.1280.1280.jpg?v=1795198012","url":"https:\/\/tinyrigco.com\/products\/baja-designs-upfitter-harness-2024-toyota-tacoma","provider":"Tiny Rig Co","version":"1.0","type":"link"}