Product details
Baja Designs LP6 Pro 6-Inch LED Auxiliary Light Pod
The LP6 Pro is a 6-inch powerhouse featuring a total of 11,225 lumens and a 200 degree spread of useable LED light. The LP6 features 9,253 forward projecting lumens and 1,972 lumens of dedicated peripheral lighting courtesy of our patented Integrated Peripheral Technology (IPT).
To keep your light performing at its highest potential, the LP6 integrates our proprietary Direct Ducted Cooling (DDC) technology. This feature allows air to travel through the front of the housing, over the rear heat sinks - drastically improving cooling capacity and performance.
With an amber day-time running light, low power, and high power mode, the LP6 will fulfill all your lighting needs.
Highlights
- Satisfaction Guarantee - 30 Day Money Back Guarantee
- Limited Lifetime Warranty - Complete Purchase Protection
- uService - Replaceable Lenses And Optics
- ClearView - All The Light, Right Where You Need It.
- MoistureBlock - Waterproof, Rain Proof, Submersible
- CopperDrive - Only LED Driven At 100 percent
- 5000K Daylight - Less Driver Fatigue, Natural Color
Spot or Driving/Combo?
Driving/Combo gives you maximum trail coverage in a single light. It pairs Wide Driving (42 degree) and spot (8 degree) optics for a smooth blend of light for both near field applications and distance (Lighting Zone 3). Clear is part number 270003 and Baja Amber is 270013.
Spot is a longer and narrower 8 degree beam focus for illumination further down the trail or road, designed to be used with additional Wide Driving and/or Driving/Combo lights (Lighting Zones 4 and 5). Clear is 270001 and Baja Amber is 270011.
Running the clear Driving/Combo? You can also swap the amber backlight for red (270014), blue (270015) or green (270016) to set your rig apart at shows and meetups. Colored backlights are for exhibition use only and should not be used on public roads.
The Details
- Forward Projecting Lumens: 9,253 Utilizing 6 LEDs
- Forward Projecting Wattage/Amps: 90W / 6.5A
- IPT Lumens: 1,972 Utilizing 4 LEDs
- IPT Wattage/Amps: 15W / 1.0A
- Backlight Wattage/Amps: 4.14W / 0.3A
- Dimensions: 6.5 inch Height / 6.5 inch Width / 3.2 inch Depth
- Weight: 4.2lbs
- LED Life Expectancy: 49,930 Hours
- Front Lens: Hardcoated Polycarbonate
- Housing and Bezel: Powder Coated Cast Aluminum
- Hardware and Bracket Material: Stainless Steel
- Connector: Deutsch DT06-4S
- Exceeds MIL-STD810G (Mil-Spec Testing)
- Built-In Overvoltage Protection
- IP69K (Waterproof up to 9ft and Pressure Washable)
- IK10 Compliant (Mechanical Impact Testing)
In the Box
One LP6 Pro light with its stainless steel mounting bracket and hardware. It's a universal light, so fitment comes down to having a flat mounting spot for the bracket. The wiring harness is sold separately.
Professional Install at Tiny Rig Co
Whether you're putting a pair of LP6 Pros on the bumper or up on the A-pillars, our shop can mount, aim and wire them for you. To book an install, check out our services.
Planning something more involved, like a full lighting setup, a custom mount or wiring through a switch panel? Reach out to us and we'll help you work out the details.
Shipping and Lead Time
Baja Designs parts are ordered for you after you check out. Expect your order to ship from us in about 1 week.
