Tiny Rig Co

Tiny Rig Co | 1/4 Chub Chase Light Mounts for GoFast Campers (GFC)

SKU: TRC100700

$71.25 $95.00 SAVE $23.75

How do you want it?

Parts ship to your door. Shipping is calculated at checkout and may vary by supplier.

Pickup available at Tiny Rig Shop

Usually ready in 5+ days

View store information

Tiny Rig Co | 1/4 Chub Chase Light Mounts for GoFast Campers (GFC)

Billet Mounts Only

Tiny Rig Shop

Pickup available, usually ready in 5+ days

6346 Industry Way
Westminster CA 92683
United States

+16574002009
Prefer to talk first? Schedule a consult
Fit Guarantee Wrong fit? We fix it.
Shipping at checkout Rates vary by supplier

Product details

1/4 Chub Chase Light Mounts for GoFast Campers (GFC)

Mounting chase or dust lights on a GoFast Camper usually means bolting to the extrusion or drilling through the door, and then you're stuck figuring out where the wire goes. Plenty of folks shove it between the door and the frame and call it good enough. We don't work that way. My brain can't handle something that sloppy.

So I walked over to the camper, looked at the strut mount hardware, and thought: flip it around and thread it into a mount. Our designer ran with it, we tested it, and it worked awesome.

Then we made it look like it belongs. The pockets and lines come straight from design details already on the GFC, so the Chub looks like it was made right alongside the camper, not bolted on after.

Each one is machined from a solid chunk of 6061 T6 aluminum, weighs a quarter pound (hence the name), and gets a black UV stable anodize so it won't fade.

Mounting the light is easy. Running Baja Designs S1s? Use the 1/4-20 hardware Baja includes. Running S2s? Swap their hardware for a 1/4-20 bolt and you're set.

We include a drill jig, so you know exactly where your wire goes. No guessing, no wire pinched in the door.

Two Chubs. Two holes. A whole lotta OCD lighting goodness.

Choose Your Setup

  • Billet Mounts Only: bring your own S1, S2, or similar light.
  • Add Baja Designs S1 - Amber Wide Cornering: amber chase light that cuts through dust.
  • Add Baja Designs S1 - Clear Wide Cornering: wide clear beam for rear and side light.
  • Add Baja Designs S1 - Clear Work/Scene: even flood for camp and work light behind the truck.

Features

  • Mounts to the existing GFC strut hardware, so no drilling into the extrusion or door
  • Machined from solid 6061 T6 aluminum
  • Black UV-stable anodize that won't fade
  • Drill template included for a clean wire pass-through
  • Design details matched to the GFC, so it looks factory
  • Designed and built by Tiny Rig Co

Specs

  • Camper mounting: existing GFC strut mounting hardware
  • Material: 6061 T6 aluminum, machined
  • Finish: black anodize, UV stable
  • Weight: 1/4 lb each
  • Light mount: 1/4-20 threaded hole, 1 in deep

Fitment

Fits all GoFast Campers (GFC) Toppers and Platform campers, for both midsize and full-size trucks.

What's Included

  • 2 x 1/4 Chub mounts
  • 1 x 3D-printed drill template
  • 2 x rubber grommets for the wire pass-throughs
  • 2 x Baja Designs S1 lights (with any "Add Baja Designs S1" option)

Installation

Plan on about 1 to 2 hours (including time for wiring). You'll need medium-strength (blue) thread locker, a strap to hold the panel, a marker, a small drill bit, a 3/8" drill bit, a deburring tool and dry lube.

  1. Unbolt the rear struts. You'll reuse these bolts to mount the chase light mounts.
  2. Use a strap to hold the panel up, since the struts aren't supporting it during the install.
  3. The mounts are internally threaded and replace the nut. Flip the bolts around and put them through the panel from the inside.
  4. Apply blue thread locker to the bolts and bolt the chase light mount to the panel.
  5. Place the drill template on top of the mount.
  6. Mark your center point with a marker and drill a small pilot hole.
  7. Open the hole up to 3/8" and deburr the edges.
  8. Use a little dry lube to install the grommet into the hole.
  9. Install the light onto the mount with the 1/4-20 screw and bracket from Baja Designs, using blue thread locker on the screw.
  10. Feed the wire through the grommet.
  11. Run your wires cleanly along the top tubing of the GFC and connect them to the switch or controller of your choice.

Pairs With

Confirmed with Baja Designs S1 and S2. For S1s, use the 1/4-20 hardware Baja includes. For S2s, swap in a 1/4-20 bolt. Other similarly sized lights will work as well.

The Tiny Rig Fit Guarantee

When a product is shown as a confirmed fit, we guarantee it matches the vehicle you selected or we make it right. No more guessing whether a vehicle-specific part belongs on your rig.

Field Notes

Read before you buy

Stories and tips from Tiny Rig Co. If you are on the fence, start here, then come back and add to cart.

All Field Notes →